Sheet metal products price

Here you can find various price lists and calculation examples for manufactured products.

Sheet metal bending components

Eaves element, flange element, parapets, rake edges, ridges, valleys, windowsills and other sheet metal bending components.

Price calculation example

If, however, it remains unclear how the final price is calculated, here is an example. Suppose you want to order the product as shown at the picture right below. Its width is divided into four areas A1, A2, A3, A4. This means that the billet of the windowsill is a simple rectangle with sides a (A1 + A2 + A3 + A4) and b as shown on the left. Side a is the width of the billet and the side b is the length. Side a consists of several folds. Suppose that the width of the windowsill or it’s side is 300 mm. Accordingly, to the price of the table, each meter with polyester covering will cost € 2.62.

If side a = 300 mm and side b = 1 meter then price is 2.62 € for Polyester coating

If side a = 300 mm and side b = 2 meters then price is 5.24 € for Polyester coating

If side a = 155 mm and side b = 3 meters then price is 6.15 € for Polyester coating

K-style rainwater system components price

Round rainwater system Ø 125/100 mm elements price

Round rainwater system Ø 150/120 mm elements price

Sheep metal roofing pane prices

Cenas sniega aiztures barjerai